Sticky Machines
 


Model 1200 for prints up to 12inch (30cm) wide

Sticky machines are wonderful! They are possibly one of the quickest methods of mounting photographs or artwork. Simply pass the print through the machine to apply a permanent adhesive and a silicone paper backing. The unused adhesive is discarded with the temporary foil cover. The machine even has a cutter built in. The adhesive is contained in a easily replaced cartridge. If you only have a few small prints to mount, it is possible to pass them through side by side to avoid waste.
 
  

 

The Sticky machine can also be used to encapsulate prints in a glossy film. The smaller machine will also produce fridge magnets, with the a special cartridge which applies a glossy laminate to the front and a magnetic backing.

 

The light weight Model 85 for prints up to 8 ½ inch (21.5cm)

  

 

 

Trim off the print

Feed the print through the machine 

 

 

 

 

  

Peel back the silicone paper
and apply to the card or album
   

Simple cartridge loading

Starter kits

1200 Machine ...... Prints up to 12 inch wide (A3, 30cm) Supplied with a sample encapsulation cartridge and a full 50ft (15m) permanent adhesive..........
[S1200] Sticky machine 1200 inc 1 cartridge
£ 153.00 + VAT

85 Machine..... For prints up to 8 ½ inch wide (A4 21.5cm) Supplied with a sample encapsulation cartridge and 2 full 39ft (12m) Permanent adhesive........
[S900] Sticky machine 85 inc 1 cartridges
£ 48.00 + VAT

Copyright (c)2008 Bellwood Photography   - prices shown in GBP as at 10-May-2008